Opens in a new tab

Resources: Blog

Showing 7 - 12 of 88 results
Mold cross section identifying the pouring cup, sprue, runner, gate, casting cavity, riser and vent, with their filling, feeding and gas escape roles.
Risers in Casting: Purpose, Types and Design ...Learn how casting risers prevent shrinkage, how open, blind, top, side, live and dead risers ...
November 2, 2026 - 11 min read
Read More
Five elements of castability: mold filling, feeding, hot-tearing resistance, gas and inclusion control, and compatibility between the metal and mold.
Castability of Metals: Meaning, Factors and Alloy ...Learn how fluidity, feeding, hot tearing, gas and inclusion control, temperature and part geometry determine ...
October 30, 2026 - 12 min read
Read More
Surface sections compare pickling that removes oxide and affected metal with passivation that removes free iron without significant base-metal removal.
Pickling vs Passivation for Stainless Steel Castings: ...Learn when stainless steel castings need pickling, passivation or both, how each treatment changes the ...
October 30, 2026 - 13 min read
Read More
Comparison of cast CB7Cu-1, UNS J92180, under ASTM A747/A747M with wrought 17-4 PH, Type 630, UNS S17400, under applicable wrought specifications.
17-4 PH Investment Casting: CB7Cu-1, Properties, Heat ...Learn how cast CB7Cu-1 relates to wrought 17-4 PH, how heat-treatment conditions change its properties, ...
October 30, 2026 - 12 min read
Read More
Four mold-preparation objectives: remove bulk wax, remove residual organics, develop fired shell properties and set the mold condition for pouring.
Dewaxing and Burnout in Investment Casting: Autoclave, ...Understand how autoclave dewaxing, burnout, shell firing and mold preheating remove sacrificial patterns and prepare ...
October 29, 2026 - 11 min read
Read More
Investment Casting Cost
Investment Casting Cost: Tooling, Materials, Volume & ...Understand the main investment casting cost drivers, from tooling and materials to volume, machining and ...
October 23, 2026 - 13 min read
Read More